Our commitment in action

NANO4-ULTRACOAT®

Throught it’s unique formula, creates an invisible layer of 500nm thicknes, offering on all porous surfaces TEXTILE-WOOD-STONE-SHOES  
Special Sealing and antibacterial protection

About 

Nano4-Ultracoat® is a new water based Ultra-hydrophobic coating Nanotechnology product. After applying the product and upon completion of the curing process (24 hours), a thin layer 500 nm of SiO2 (Silicon Dioxide) seals the protected area so.  

​PRODUCT’S UNIQUE ATTRIBUTES:

​Protects from oil/water penetration (iso 4920 2/ rating 90-100, iso 14419 rating 5) on fabrics, woods  and stones and so generates an inho-spitable environment depriving microorganisms of moisture and food. Because of absence of water AATCC 100 standards can be achieved in a physical way without using of biocides. By its ultrahydrophobic effect, water is will be concentrated on the surface at an optimum, leaving a maximum of dry places, where a high natural death rate of wet germs (pseudomonas aeruginosa, proteus sp., klebsiella sp., acinetobacter sp. and stenotrophomonas maltophilia) is achieved. Waterproofing and easy removal of  stains and all types of dirt deposit on the absorbent  surfaces. Humidity, coffee, ketchup, wine, oil, syrup, sauces, and other hot or cold liquids are easily removed  when it’s protected with the Nano4-Ultracoat®.

​

ESPECIALLY / PARTICULARLY SUITABLE FOR OUTDOORS:

​

    Protects stone and concrete facades, monuments or infrastructure against heavy corrosion by repelling bacteria and water. Furthermore, it creates an extremely high level of protection againstsoiling and moss growth. Protected surfaces can be washed without the use of cleaning agents.

​

 CONTACT ANGLE

Drop ultrahydrophobic contact angle of the surface is 160°. 

Whether you want to stay dry in the rain or be protected against spots by accidents of thedaily life - there is always rely on Nano4-Ultracoat® .

Nano4-Ultracoat® does not change the look, feel or breathability of the coating surface.

Nano4-Ultracoat® coats every porous surface with an invisible non-adhesive coating. This protection has the effect that dry dirt doesn't stick to the material any more. Damp dirt will not be absorbed any more from the porous surface.
 
Humidity, water, coffee, ketchup, wine, coffee, oil, syrup, sauces, and other hot or cold liquids are easily removed from the porous surfaces when it’s protected with Nano4-Ultracoat®, by simply dabbing with an absorbed cloth, the wet spots will disappear again from your porous surfaces goes back to its original state as if nothing had happened.

Nano4-Ultracoat® has no effect on the skin.

​

Nano4-Ultracoat® is certified: (Click here in order to see all of our certifications).

a)As an ECOLOGY product from the Hohenstein Textile Testing lnstitute GmbH & Co. KG  and can be used for the production of human- ecological optimized textiles under specifications of the Oeko-Tex@ Standard 100, product classes l- lV.

​

On  which surfaces can be applied:

All flat absorbent surfaces , especially textiles,wood, stones,shoes

TEXTILES

• ​Furniture

• Carpets,  and rugs 

• Canvas boat sails 

• Car Seat

• Swimming pools covers

• Theatre seats

• Shoes

STONES 

• Stone walls.

• Insulation, sealing cement pools.

• Walls painted with plastic.

​

• Tiles

• Blocks

• Stone flooring

• Sidewalks

WOOD

• Wooden structures

• Pergolas

• Wooden garden furniture.

• Deck wooden 

• Wooden roofs and trusses.

• Wooden fences

• Wooden floor

Product Qualities:

• Waterproofing and easy removal of stains and all types of dirt deposit on the fabric surfaces. Humidity, coffee, ketchup, wine, oil, syrup, sauces, and other hot or cold liquids are easily removed from the fabric when it’s protected with Nano4-Ultracoat®

• It contains no silicones, waxes or oils

• 100% ecological and certified with ECO passport from Hohhenstein Institute

• The coating is extremely strong

• 100% invisible sealing protection

• Surfaces will be easier to clean after application

• Nano4-Ultracoat® does not change the look, feel or breathability of the fabric.

• Nano4-Ultracoat® has no effect on the skin

• Antibacterial protection

• Saves the environment and money by reducing  use of chemical detergents by up to 90%

Target Customer

•    Homeowners 

•    Furniture retailers

•    Manufacturers of carpets and rugs

•    Hotels and Restaurants  

•    Cruise Ships and boats

•    Military 

•    Sports clubs and Hunters

•    Hospitals

•    Professionals tailors

Application method:

•  Clean the fabric first, before using, otherwise it will trap dirt and existing stains will be blocked in.

•  Spray the fabric with Nano4-Ultracoat® 15cm away from the surface and evenly apply Nano4-Ultracoat® to the surface where  you want protection. After applying Nano4-Furniture® it takes 24 hours (at 20C) to be fully cured. The time required for curing may  vary depending on ambient temperatures.  If you want to reduce the curing time you can Heat: 170°C 1-2min, 100°C - 4 min, 60°C -10 min.

•   Another way to protect the fabric is by dipping or submerging fabric into Nano4-Ultracoat®

•   For more and analytic installation instructions please click here (INSTALLATION INSTRUCTIONS) to read our interactive book or to Download the PDF file.

Duration of the protection:

15-20 washings (tumbler dry required)/ 3500 hours artificial weathering according to 11507 A (5-6 years outside according to European weather conditions. Provided that the placement of Nano4-Ultracoat® made in accordance with the instructions.

Consumption:

​

The amount of product needed each time depends on the method of application and the porous of the surface. In any  case  the consumption will be between 30ml/m2 and 200ml/m2. This means that 1 liter can cover the surface of 5m2 to 33m2. We recommend to test each type of surface first to determine the absorption of the surface. An easy test to calculate the absorption of the surface is to wet 1m2 of the surface by using normal water. By this way you can see what is the exactly consumption for each surface.

Quality ISO 9001:2008

​

ISO9001:2015 REGISTERED

NANO4LIFE EUROPE L.P.® is an ISO9001:2015 certified company in the production of Nanotechnology products.​​

​

During the development and production process, we invest a great deal of time and effort in determining the Life Cycle Assessment (LCA) of selected products. LCA is the global standard for assessing the total environmental impact of a product taking into account all environmental aspects , including resource and energy consumption, emissions to air, water and soil, as well as the impact on health and ecosystems. LCA is widely used by industry, governments and non-governmental organisations. We make these studies available to our customers after their completion in the belief that transparency creates sustainability and trust.

Product safety is considered paramount in our company. Diverse internal measures and company standards, which regularly go beyond the legal and customer requirements, ensure the quality and safety of our products.

We also work closely with renowned independent inspection authorities, institutes and laboratories to ensure maximum product safety.

WARNING!!!

We want to be sure that the customer will buy a genuine and functional product.

That is why all of our products are sealed with thermoplastic protection.

Do not buy a product if:
(a)It is not sealed with thermoplastic protection
b)If you find that the expiry date of the product is earlier than the purchase date.

Thermoplastic bottle sealing

LOT:

01 =date

12 =month

15 =year

06=line production

​

​

Exp. Date:

12 =month

17 =year

​

Order products

​

• All ΝΑΝΟ4LIFE® products are in stock and can be delivered within 24 hours to any destination in the world. Delivery in European Countries can be provided within 1 day. In the rest of the world delivery takes approximately 3 days with very low transportation costs.
   
• Available packs are: 100ml, 200ml, 500ml, 1Liter, 4Liters, 20Liters, 200Liters, 1000Liters.

• ​If you want to see a video with the product functions please click the video icon on the left.

• If you want to read and download the product broshure in an interactive PDF file please click here

• If you want to order the product via our e-shop please click to the e-shop button on the left.